Upozorenje !!!
Greska
OK

 
 
 
Dobrodošli, Gost. Molim vas prijavite se ili se registrujte.
Da niste izgubili svoj aktivacioni e-mail?
03.09.2010. 13:26

Prijavite se korisničkim imenom, lozinkom i dužinom sesije
 
 
 
* *
BCS Professional
 
 
 
 
Statistika Statistika
Ukupno članova: 39376
Poslednji član: u2006
Ukupno poruka: 131222
Ukupno tema: 38014
Prisutni korisnici Prisutni korisnici
Ukupno: 27
Članovi: 6
Gosti: 20
Botovi: 1
 
Kalendar
 
Petak, 03. Septembar 2010
 
 
Septembar 2010
PoUtSrČePeSuNe
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30

Današnji rođendani
03.Septembara: sead11 - 39 god.
03.Septembara: Fiki - 19 god.

Sutrašnji rođendani
04.Septembara: Bojan_93 - 17 god.
04.Septembara: korze - 17 god.

Predstojeći rođendani
05.Septembara: Magioo - 43 god.
06.Septembara: daco_off - 25 god.
06.Septembara: djsalle - 25 god.
07.Septembara: Vedrana33 - 34 god.
07.Septembara: aneokas - 31 god.
07.Septembara: saintman - 23 god.
08.Septembara: sasko - 40 god.
 
Vic Dana
 
Vic dana Vic dana
Sjedi Mujo za stolom i pita:
- "Fato, što je to: Šest nogu, dvije vise, dvije glave isto misle?"
- "Da nije zagonetka!?"
- "Jest Fato, zagonetka, reci odgovor."
- "Odgovor."
- "Joj glupe žene, odgovor na pitanje?"
- "Koje pitanje?"
- "Šest nogu, dvije vise, dvije glave isto misle?"
- "A to: Mujo na magarcu."


 
Top korisnik
 
Dr.Mr.Kirica
Teme: 5447
Postovi: 17191
Zoran
Teme: 4130
Postovi: 5286
Lendov_X
Teme: 3469
Postovi: 8790
Don_pavle
Teme: 1831
Postovi: 2541
Rile95
Teme: 1783
Postovi: 6477
LEX
Teme: 1398
Postovi: 7193
Vita
Teme: 1337
Postovi: 1533
Cobi63
Teme: 1185
Postovi: 1446
 
Download Area
 
 
Bitni Linkovi
 
 
 
Pravila foruma !
 

Želimo vam iskrenu dobrodošlicu na Lend Portal
Pozivamo vase da aktivno ucestvujete u diskusijama i time doprinesete razvoju ovoga Portala i podizanju kvaliteta diskusija.
Ipak, trebalo bi poštovati nekoliko pravila, kako bi diskusija bila fer, korektna i ugodna za sve njene ucesnike.


PRAVILNIK LENDOVISANJE FORUMA
(05.10.2007)


Uvodna reč

Lendovisanje - Forum je osmišljen i napravljen 2007. godine sa idejom da svim zaljubljenicima Zabavnih tema, olakša razmenu informacija i iskustva i podigne kvalitet zabave i druženja. Forum je neprofitna internet zajednica i vlasništvo je svih njegovih clanova. Osnovna svrha Foruma je razmena informacija i iskustava medu ljubiteljima zabave(a u buducnosti i za upoznavanje ljudi slicnih afiniteta). Moderator (uredinik) Foruma može postati svako ko je zainteresovan za pomoc i saradnju. Odluka o postavljanju člana za moderatora donosi se u okviru Admin tima. Rad i pomoć na Forumu je zasnovan iskljucivo na dobrovoljnoj osnovi. Moderator je dužan da bude aktivan član,te da svoj deo foruma uređuje i redovmo ažurira. Zabranjeno je lažno predstavljanje ili korišćenje višestrukih naloga na portalu od strane iste osobe, u cilju varanja i vredjanja drugih korisnika ili miniranje normalnog toka diskusije čak iako poruke same po sebi ne krše direktno ni jednu stavku ovog pravilnika! Svako nepostovanje ovih pravila povlaci za sobom momentalno skidanje sa pozicije moderatora!!!

Nekoliko napomena


Upoznajte se sa Forumom. Pre nego što postavite pitanje, prvo pogledajte da li već postoji takva ili slična tema u kojoj bi mogli da postavite pitanje. Koristite pretragu! Takođe, molimo članove Foruma da ne pišu postove sa ukljucenim Caps Lock tasterom, da izbegavaju pisanje poruka koje sadrže samo smajlije i da ne pišu po dve uzastopne poruke vec da upotrebom opcije "edit" odnosno "izmeni" i objedine svoje poruke u jednu poruku. Lažno predstavljanje ili koriscenje visestrukih naloga na forumu nije dozvoljeno. Hvala na razumevanju.

Pravila Portala:

1. U vezi sa temama i porukama (generalno)


1.1. Zabranjeno je postavljanje pornografskog, eksplicitnog (scene nasilja, torture, ubistva i sl.) i drugog sadržaja koji bi mogao da uznemiri ostale clanove foruma. Teme sa pornografskim sadržajem se mogu postavljati isključivo u delu portala koji je odredjen za to. Ako tema za to postoji treba naznačiti temu, npr. +18 kada je pornografijau pitanju... Takodje, strogo je zabranjeno postavljanje pornografskih sadrzaja u kojima akteri imaju manje od 18 godina, u bilo kojoj temi !!! Osobam mlađim od 18 god. zabranjeno čitati i gledati sadržaj xxx foruma...
1.2. Na Forumu su zabranjene politicke rasprave osim u podforumu "Opšta diskusija". Ostali podforumi su namenjeni iskljucivo raspravi o predmetu teme. Sve poruke i teme koje u sebi sadrže politicki kontekst bice odmah obrisane ukoliko se nalaze u nekom podforumu osim u "Opštoj diskusiji".
1.3. Na Forumu nije dozvoljeno vredanje, počev od psovki, do direktnog omaložavanja bilo kog člana foruma ili nekog trećeg lica. Ukoliko poruka sadrži neku psovku, vređanje, omalovažavanje i sl. i bude prepravljena, dobićete upozorenje ili privatnu poruku sa obrazloženjem zašto je izmenjena. Ukoliko vam nije jasno ili smatrate da nije bilo potrebe za "intervencijom" obratite se preko elektronske pošte ili privatne poruke moderatoru zaduženom za taj deo foruma i zatražite objašnjenje. Sve teme tipa "Zašto mi je obrisana poruka?" će biti automatski obrisane, bez obrazloženja! Ukoliko vas sadržaj neke poruke uvredi ili vam na neki nacin zasmeta prijavite to preko privatne poruke ili elektronske pošte nekom od moderatora zaduženom za taj deo foruma. Ukoliko moderator zaključi da vaše obrazloženje za uklanjanje dela ili cele poruke ima smisla, poruka ce biti izmenjena ili uklonjena.
:: Napomena ::Ukoliko u nekom delu foruma ne postoji urednik/moderator za problem se možete obratiti bilo kom članu forum tima!
1.4. Najstrože je zabranjen bilo kakav vid spama na Forumu – neželjene poruke, slanje istovetnih tema u više podforuma, kao i postavljanje istovetnih poruka u više različitih tema.
1.5 Kompletnu odgovornost za sadržaj objavljenih tekstova na Lend Portalu snose iskljucivo njihovi autori, ciji je pseudonim jasno označen pored sadržaja teksta. Moderatori nisu odgovorni za ono što napišu članovi Lend Prtala. Moderatori snose odgovornost samo za sadržaj svojih poruka! Članovi i moderatori Lend Prtala ne odgovaraju za reci koje u njihovo ime neko drugi napiše na drugim sajtovima, forumima ili chatu!

2. U vezi sa temama i porukama


2.1. U okviru tema pokrenutih u podforumima nepotrebne i poruke koje nemaju veze sa temom/predmetima (offtopic) ce biti momentalno obrisane da ne bi dolazilo do zatrpavanja korisnih informacija pricama koje nemaju veze sa zatraženim informacijama. Takode, poželjno je pisati samo proverene informacije, vreme kada je informacija nabavljena i gde/od koga.
2.2.Piraterija: Nije dozvoljen bilo kakav vid piraterije, odnosno korišćenje tuđe intelektualne svojine bez dozvole autora. Nemojte tražiti i postavljati skenirane knjige, časopise, video i foto materijale, itd, za koje nemate usmena ili pisana odobrenja autora.
2.3. Svi linkovi koji vode direktno ka drugom sajtu moraju biti stavljeni u code tag a linkovi koji se koriste za download moraju biti u hide tagu.Dakle,svi fajlovi koji su linkovani sa ovog foruma su u promotivne svrhe i dužni ste da ih obrišete u roku od 24h sa Vašeg računara, ukoliko Vam se download-ovani fajl svidi, platite isti autoru (KUPITE GA).Ni jedan fajl linkovan sa našeg foruma se ne nalazi na našim serverima, mi sve fajlove linkovane na našem forumu samo INDEKSIRAMO.
2.4.Prijavljivanje postova. Sve postove koji sadrže bilo kakav neprimereni sadržaj (vredanje, reklama...) prijavite. Time cemo lakše održavati forumsku cistocu i poštovanje pravila.

3. U vezi sa potpisima i avatarima


3.1. U potpisima i avatarima ne sme biti nikakvih politickih parola, simbola i sl. Ukoliko bude bilo, potpis/avatar ce biti uklonjen. Osim uklanjanja potpisa/avatara, clan može biti privremeno ili trajno udaljen sa Foruma ukoliko njegov avatar sadrži bilo kakve licne, nacionalne, verske i druge netrpeljivosti i nedržavne elemente, kao i simbole i druge asocijacije.Potpisi su ograničeni na 150 karaktera.... Takode se podrazumeva da nije ni malo poželjno otvarati naloge zbog politicke/verske/rasisticke promocije neke stranke, sekte ili udruženja! Takve poruke i nalozi ce biti momentalno obrisani! Pored navedenog, nije dozvoljeno stavljanje komercijalnih oglasa u potpis. Slika ili slike postavljene kao avatar ili potpis ne smeju biti pornografskog, eksplicitnog (scene nasilja, torture, ubistva i sl.) i drugog sadržaja koji bi mogao da uznemiri ostale clanove foruma.
3.2. Velicina avatara (slicice koja kod svake poruke stoji ispod nadimka) ne sme biti formata veceg od 80x80 pikela i "teži" od 30KB. Takode, u potpisu nije dozvoljeno stavljati slike dimenzija vecih od ukupno 350x40 piksela, odnosno ukupno 60KB "težine".
3.3. Tekstualna signatura ne sme biti veca od 6 redova normalnog teksta odnosno jedan red teksta velikog formata. U slucaju kršenja nekog od ovih pravila administrator ce ukloniti sporni avatar/signaturu/sliku i o tome obavestiti korisnika.

4. U vezi sa privatnošcu na Forumu


4.1. Nije dozvoljno ostavljanje tudih licnih informacija, kao ni slika, niti brojeva telefona. Ukoliko neko želi, odnosno ima potrebu za iznošenjem iskljucivo svojih licnih podataka, može to uciniti na sopstvenu odgovornost. Svi ostali, tudi licni podaci ce biti uklonjeni, u cilju zaštite privatnosti clanova Foruma.
:: Napomena ::
Iako se Lendovisanje forum tim zalaže za privatnost na Forumu, to ne znaci da svako može pisati šta god poželi, ne razmišljajuci o posledicama! Svako treba da stoji iza svojih reci, i sami snosite odgovornost za ono što napišete! (Pogledajte clanove 1.4 i 1.5)


5. U vezi sa reklamiranjem na Forumu


5.1. Svaka poruka ciji je cilj reklama nekoga ili necega, a nema veze sa zapocetom temom ce biti uklonjena ili premeštena tamo gde joj je mesto (najverovatnije u podforum Oglasi). Takođe je zabranjeno reklamiranje drugih sajtova, takvi linkovi su obavezni da budu u kodu,npr.
Kod:
www.neki sajt.com


6. U vezi sa nepridržavanjem gore pomenutih pravila


6.1. Ukoliko se neki clan Lendovisanje Foruma ne bude ponašao prema ovom pravilniku bice udaljen (banovan) sa Foruma na odredeno vreme ili ce mu biti obrisan korisnicki nalog. O tome ce odluku doneti Lendovisanje forum tim.
6.2. Ukoliko primetite da je neka stavka pravilnika prekršena slobodno kontaktirajte nekog od moderatora.
6.3. Takodje, moderatori Foruma dužni su da poštuju sve stavke ovog pravilnika. Ukoliko smatrate da se neko od moderatora ne pridržava gore navedenog, da se ponaša nasilnicki i pristrasno, možete se obratiti glavnom administratoru Foruma (Admin)

7. U vezi sa primedbama i pitanjima


7.1. Ukoliko imate bilo kakva pitanja ili primedbe u vezi sa Forumom, slobodno kontaktirajte nekoga od moderatora, ili postavite pitanje u forumu "Predlozi i pitanja u vezi foruma".
7.2. Vlasnik i uprava foruma zadrzavaju sva prava izmene i dopune pravilnika.Pravilnik je vlasništvo ovoga foruma te je svako kopiranje njegovog sadržaja zabranjeno.
7.3. Nemojte se raspravljati sa administratorima ili moderatorima o gore navedenim pravilima. Administratori i moderatori imaju ekskluzivno pravo da ureduju forum prema sopstvenom nahodenju i slobodnoj procjeni i nisu dužni davati bilo kakva objašnjenja ili se pravdati za svoje postupke.Vaše ponašanje na forumu je odraz vašeg vaspitanja.Bilo kakva rasprava sa administratorima preko foruma ili privatnih poruka povlaci automatsko udaljavanje sa foruma!!!
7.4. Napominjemo da je ovaj sajt privatno vlasnistvo,te da je posecivanje ovog sajta strogo zabranjeno.Sve informacije i fajlovi koje se nalaze na ovom sajtu jesu privatno vlasnistvo i namenjene su Samo u NAUCNO/ISTRAZIVACKE svrhe,te stoga mi ne odgovaramo za nacin na koji cete VI iskoriscavati informacije koje se nalaze na ovom sajtu!! Dakle,svi fajlovi koji su linkovani sa ovog foruma su u promotivne svrhe i dužni ste da ih obrišete u roku od 24h sa Vašeg računara, ukoliko Vam se download-ovani fajl svidi, platite isti autoru (KUPITE GA).Ni jedan fajl linkovan sa našeg foruma se ne nalazi na našim serverima, mi sve fajlove linkovane na našem forumu samo INDEKSIRAMO.

Želimo vam ugodno korišcenje Lendovisanje - Foruma!
Hvala, Lendovisanje forum tim…



Zatvorite ovaj okvir sa pravilima
To možete na strelicu u naslovu okvira ili na ove tri tačkice ispod strelica
↓↓↓
 
Objavi Temu: C A D na FB!
Prosečna Ocena: 5
Stranice: 1 2 3 [4] 5 6   Idi dole
  0 članova i 1 gost pregledaju ovaj forum.
  Štampaj  

58
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.6
  

Ecotect v5.50

Kompleksna analiza perfomansi zgrade (termika, zvuk, osvetljenje, analiza senke, insolacija, provetravanje i sl.). Moguca veza sa drugim CAD programima (ArchiCAD, AutoCAD...)



ECOTECT is a complete building design and environmental analysis tool that covers the broad range of simulation and analysis functions required to truly understand how a building design will operate and perform.

ECOTECT offers a vast range of modelling, visualisation and analysis features. The following links provide detailed information about the different capabilities of the program and how they are implemented and applied.

# Shadows Reflections
# Shading Design
# Solar Analysis
# Lighting Design
# Right-to-Light
# Acoustic Analysis
# Thermal Analysis
# Ventilation Air Flow
# Building Regulations
# Resource Management
# Visualisation Import / Export

vise informacija o vezi sa ArchiCAD-om u multimedijalnoj prezentaciji:
Kod:
http://www.graphisoft.com/ftp/marketing/ac11/ecotect/ArchiCAD-Ecotect-Flash/ArchiCAD-Ecotect.html

 :just:
Vi možete pregledati skrivene sadržaje !
http://rapidshare.com/files/195915124/Ecotect.v5.50.rar
~36 MB
PS ociscen od virusa, provereno!
« Poslednja izmena: 20.03.2010. 21:52 Dr.Mr.Kirica »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
57
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.5
  

Print2PDF 8.0.08.1124


This easy-to-use PDF (Portable Document Format) conversion tool is the ultimate solution for any organization with a computer network. It allows every network user to convert documents into PDF from any application that can print.
Convert to Adobe PDF from any application
Print2PDF can create an Adobe® PDF from any application that can print. Supports paper sizes up to 200 inches, landscape and portrait orientation, and a resolution of up to 2400 DPI.
Compatible with Adobe PDF standards
Support for creating PDF files that are compliant with Adobe® specifications 1.3, 1.4, 1.5 and the ISO 19005-1 PDF/A-1a archive standard gives you the greatest flexibility in working with PDF.
Web conversion through Microsoft IIS
Easily convert documents to PDF using a simple interactive web application or through a SOAP web sevice interface.
Terminal Services and Citrix MetaFrame Presentation Server support
Reduce your administration costs by centralizing PDF creation with Windows® Terminal Services or Citrix® MetaFrame®.
Simple distribution and licensing
Easily distribute the network shareable Print2PDF print driver to client workstations. Control PDF conversion preferences, setup profiles and allow Microsoft Office integration.
Watched folders and POP3 e-mail accounts
Define multiple watched folders and POP3 accounts that can be used to centrally convert documents into Adobe PDF.
Digitally sign Adobe PDF documents
Sign documents using a digital signature from the Windows Certificate store to verify identity and provide tamper-resistance.
Encrypt Adobe PDF documents
Use 40-bit or 128-bit RC4 encryption to secure your sensitive documents. Use this industry accepted standard to protect and control access permissions to your Adobe PDF documents.
Easily merge Adobe PDF documents
Create a single PDF from multiple sources (e.g. e-mail, Microsoft Word, AutoCAD) to deliver one document that anyone can open.
 :just:
~16MB

Данас је први дан остатка нашег живота. Зато...
Sačuvana
56
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.5
  

MasterCAM X2 SP1 Build 11


Malo neuobicajeniji softver za CAD forum, tj. ovo je CAD/CAM softver koji integrise kompjuter sa kompjuterizovanim masinama za pravljenje raznih proizvoda i alata... Da prosto kazemo da je program za prakticnu primenu.  Prvenstveno bi trebao zanimati masinske inzenjere i one koji se bave izradom finalnih proizvoda uz pomoc kompjuterizovanih masina, glodalica i sl...

Mastercam delivers CAD/CAM software tools for all types of programming, from the most basic to the extremely complex. 2-axis machining, multiaxis milling and turning, wire EDM, router applications, free-form artistic modeling and cutting, 3D design, drafting, surface and solid modeling – whatever your machining needs, there is a Mastercam product for your budget and application. Mastercam Solids Add this fully-integrated Parasolid-based solid modeler to Mastercam’s award-winning CAM products to create, import, and machine solid models. Mastercam Design Streamlined 3D CAD software included in Mastercam Mill, Lathe, Router and Wire. Also available as a stand-alone package. Mastercam Mill Powerful, fully associative programming package for 2, 3, 4, and 5-axis milling. Mastercam Lathe Associative CNC programming system for simple to complex turning. Mastercam Router Easy-to-use associative CAD/CAM specifically designed for routers. Mastercam Wire Quick and easy associative wire EDM programming. Mastercam Art Easily design and machine beautiful 3D work from flat art, drawings, and photographs. Adds on to Mastercam Mill and Router.
 :just:

Данас је први дан остатка нашег живота. Зато...
Sačuvana
55
Odgovor
Lendov_X
Administrator
**********
Van mreže
Pol: Muškarac
Teme: 3469 - Poruke: 8790
Windows XP
Firefox 3.0.5
  WWW 

AutoDesk Impression v2.0.21973


Impress your colleagues and clients with compelling presentation-ready graphics created directly from your DWG™ and DWF™ files. Autodesk® Impression software is easy to use, saves you time, and recognizes data from your CAD files.
<!--stopindex-->
 
<!--startindex-->

Autodesk Impression is available to AutoCAD®, AutoCAD®Architecture, AutoCAD® Civil 3D, AutoCAD® Map 3D, AutoCAD® MEP, AutoCAD® Revit® Architecture Suite, AutoCAD® Revit® MEP Suite, AutoCAD® Revit® Structure Suite, Revit® Architecture, Revit® MEP, and Revit® Structure software products’ subscription customers.


System Requirements
<!--stopindex--><!--startindex-->

    * Intel® Pentium® 4 processor, 3.0 GHz or faster recommended; or Intel or AMD® processor, 1.7 GHz or faster for laptops
    * Microsoft® Windows Vista™ (Home Basic, home Premium, Ultimate, Business, and Enterprise), Windows® XP Professional SP2*
    * 1 GB RAM or more
    * 2 GB or more hard drive space available (not including installation)
    * 1,280x1,024 32-bit color video display adapter (True Color)
    * 128 MB or more DirectX® 9.0c API-capable graphics card supporting Pixel Shader 2.0 or greater**. For optimal performance with Autodesk Impression software, download the latest video driver from the website of your card’s manufacturer.
    * Microsoft® Internet Explorer® 6.0 (SP1 or higher)

<!--stopindex-->
 
<!--startindex-->

* Microsoft® Windows® XP Professional (SP2) is available from Microsoft.

**Recommended graphics cards include: NVIDIA® Quadro® FX mobile solutions, NVIDIA® GeForce® FX 5, 6, and 7 graphics processors families (for example, 6600, 7800), ATI Radeon™ X series graphics cards (for example, X300, X600, X1300), ATI Radeon 9500 and later, and ATI FireGL™ V3600, V5600, V7600, V8600, V8650, and newer graphics cards.


« Poslednja izmena: 03.04.2010. 21:44 Dr.Mr.Kirica »

Sačuvana
54
Odgovor
Lendov_X
Administrator
**********
Van mreže
Pol: Muškarac
Teme: 3469 - Poruke: 8790
Windows XP
Firefox 3.0.5
  WWW 

VTC Autodesk AutoCAD 2009 Mastering Basic 2D


VTC Autodesk AutoCAD 2009 Mastering Basic 2D
Packager ……. : CFE Team
Our Rls Date … : December 2008
Store Date ….. : 2008
Platform ……. : Win/Mac
Program Type … : Training
Protection ….. : Condom
Cracker …….. : N/A
Format ……… : bin/cue
 
Autodesk AutoCAD is the worlds most widely used Computer Aided Design (CAD) package. It lets you design, visualize and communicate ideas with ease and efficiency. AutoCAD 2009 has new features that make tasks easier and quicker too. This VTC course provides users with the basic essentials needed to master AutoCAD 2009 with emphasis on how to create, edit and plot AutoCAD drawings. Use AutoCAD to communicate your ideas, concepts or designs to customers, colleagues and peers! Work files are included. To begin learning, simply click the movie links.

* The AutoCAD Work Files used in this course are in the AutoCAD 2007 DWG file format, and cannot be read by versions of AutoCAD before AutoCAD 2007.

Link: http://www.vtc.com/products/Autodesk-AutoCAD-2009-Mastering-Basic-2D-Concepts.htm

Enjoy !
Rapidshare Links:

PW: 0erick0

Sačuvana
53
Odgovor
Lendov_X
Administrator
**********
Van mreže
Pol: Muškarac
Teme: 3469 - Poruke: 8790
Windows XP
Firefox 3.0.5
  WWW 

Autodesk Lustre v2009


Autodesk Lustre v2009 | 162.17 MB

The Autodesk® Lustre® color-grading and color management software is the premier, high-performance solution for interactive film, high-definition (HD) grading, and look creation. Production-proven, Lustre has been used for hundreds of movies, commercials, music videos, and television shows around the world. It provides high-quality, real-time color-grading capabilities for today’s data-centric workflows. Designed to combine the best in performance and creative tools with advanced configurability, Lustre can be adapted for the most demanding workflows.

Rapidshare Links:

Megaupload Links:

Easy-Share Links:






Ovaj program prvenstveno sluzi za korekciju boja u filmovima i video projektima (moze i za 2D) i nije u domenu CAD alata (nesto kao Fusion, Shake ili Nuke, a za 2D kao Davinci).
Ali, ako se odlucite da ovo ipak skinete i probate, nemojte se razocarati ako vam se komp bude "zaglupeo" na xy minuta, jer ovaj alat zahteva zmaj-masinu. Obicno ovaj sotver ide uz masinu i u nasem blizem i daljem okruzenju nema legalnog sistema blizeg od Minhena (podatak iz 2007.).
Pre Autodeska, ovaj softver je bio vlasnistvo ekipe Madjara i firma/program je bila Colorfront-ov. A posto Budimpesta nije daleko od Beograda, pazite se, ukoliko se negde reklamirate da obradjujete video i sl. projekte u ovom programu.
Zasto?
Pogledajte samo cene (iz 2007, naravno):
Autodesk Lustre kosta izmedju 300-400 hiljada evra zavisno od konfiguracije.
Sam hardver koji se nalazi u njemu je oko 100 hiljada.
Video karta DVS Centaurus sama kosta 20 hiljada, a QUADRO 5500 SDI je oko 8 hiljada.
Tako da je zamisao napraviti ovu spravu kod kuce potpuno suluda. (citat sa dizajn zone)


intervencija by slyboogy

« Poslednja izmena: 26.12.2008. 09:10 slyboogy »

Sačuvana
52
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.4
  

Cigraph ArchiSketchy 1.97 for Archicad 11 Multilingual


ArchiSketchy is a new extension that uses API technology to add new functions to ArchiCAD. This Plug-In was designed to allow ArchiCAD users to transform regular computer drawn projects into warmer hand drawn style designs. The road is open to creativity, with the possibility to elaborate and personalize your project in a style that resembles hand drawn designs done with a pencil and pen, but without the smudges or imperfections.


Work method
ArchiSketchy is very easy to use, simply select the drawing to be transformed (whether it is from the plan, Section/Elevation window, or 3D) and choose, from the ArchiSketchy menu, the type of transformation desired.
In the dialogue window of ArchiSketchy, there is the possibility of choosing between seven different transformation styles, where the pens, lines, fills and text of each of these transformations can be personalised by the user.


~14 MB

Данас је први дан остатка нашег живота. Зато...
Sačuvana
51
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.4
  

GRAPHISOFT ARCHICAD 12 HOTFIX 2325

This Hotfix includes important fixes for bugs discovered since the original release of ArchiCAD 12 (Build 2156). This Hotfix can be applied to any builds of ArchiCAD 12 (Build 2156 and above).


~92 MB

List of bugs fixed in this Hotfix:

Compared to ArchiCAD 12 Hotfix 1 - Build 2285. If you are upgrading from a build earlier than 2285, please make sure to read the relevant release notes as well!
84859 CRASH - During autosave, if an antivirus application is locking the autosave file (Mac only)
83366 CRASH: When canceling the pasting dialog while importing an external layout
81505 CRASH: When editing Curtain Wall parameters in settings dialog, if IFC tab is enabled
82758 CRASH: When exiting ArchiCAD, if file contains markers that are detached from their viewpoint
79865, 84272, 85294 CRASH: When opening file
84508 CRASH: When placing schedule on layout
62583 CRASH: When printing, caused by certain font types
85662 CRASH: When quitting ArchiCAD by closing the floorplan window with the 'close window' button, if there are outdated Hotlinks in the file (Mac only)
83957 CRASH: When sending/receiving changes to TeamWork file, if another user modified the attribute set in the central file
81098 CRASH: When starting ArchiCAD, caused by the IFC add-on
82482 CRASH: When updating drawings, in some files migrated from ArchiCAD 11
76925 FILE: 'connection to server failed' warning appears during copy/paste action, if file refers to unavailable volumes in Hotlink or drawing manager
85248 FILE: Custom components are not properly saved with project archive (PLA) files
85211 FILE: One year educational license does not work if the Username contains accented letters
84230 FILE: Output to Piranesi does not export Sun location
82441 FILE: Re-linking an external drawing from a network location to another may fail
82904 FILE: Saving project archive (PLA) may not include all library parts in some special cases
83941 FILE/Hotlink: Dimensions attached to elements belonging to a skipped nested module still appear in the host file after migrating AC 10 or older projects into AC 12
85466 FILE/Hotlink: Elevating a copy of a hotlinked module in 3D causes duplication of elements
84423 FILE/Hotlink: Hotlink update fails if stories are deleted from the source file

(Note: after the fix, if a referenced story is deleted from the source file, the Hotlink manager will show the hotlink name with a (missing) extension after its name. Also note that deleting any but the top story in the source file forces other stories to be renumbered; as a result hotlink references will also shift. E.g. if story 4 becomes story 3 in the source file, then the hotlink that previously showed the 'old' story 3 will now show the 'new' story 3.)
84183 FILE/Hotlink: Order of Hotlinks in Hotlink Manager is random (After the fix they are listed alphabetically)
83592 FILE/Hotlink: Radial and arc length dimension texts in hotlinks do not keep their position when migrated into AC 12
83828 FILE/Hotlink: Unused layers from the hotlink are also imported into the host file.

(Note: After this fix the old, ArchiCAD 11 logic is restored, however, it is still possible to import all layers (and layer combinations) by setting the registry/preference key 'HotlinkLayerCombinationEnabled'. See details on ArchicadWiki)
85471 FILE/Hotlink: Updating hotlink may cause freeze, if there is a circular reference between the host and the linked file
82662 FILE/IFC: Modifying parameters of certain IFC objects displaces the object
82950 EDIT: Copy/paste can be slow if file contains unavailable external drawing links or hotlinks
84129 EDIT: Copy/pasting 3D view to floorplan - shadow polygons are displaced if project is far from the global origin point
83423 EDIT: Info box does not show the properties of the selected item, if Trace Reference is on and Special Snap Options is set to 'Between Intersection points'
80713 EDIT: Nudging doors and windows has a long delay
84943 VIEW: Pan/Zoom on floor plan is slow if a Curtain wall is present in the project, and Special Snap Options is set to 'between Intersection points'
84889 VIEW: Single story (thin) marquee filters out model elements that have a different home story than the current story
83984 DESIGN: Editing Curtain wall scheme - preview is sometimes wrong, showing pyramids of different sizes
82959 DESIGN: Grid Element Tool - 'Grid line dimension' checkbox in infobox does not work
84729 DESIGN: Grid Element Tool is inactive in Interior Elevations
79811 DESIGN: Grid System - 3D text is not properly oriented in perspective views
77689 DESIGN: Mitering of curved and straight slanted walls is wrong in both 2D and 3D
82847 DESIGN: Non-tangential junction of profiled walls may be incorrect in 3D
84050 DESIGN: Rotating a curtain wall is frame may give incorrect result - the preview and the result of the operation is different
83426 DESIGN: Trimming a wall to a stair with Solid Element Operations does not work
84616 DESIGN: Wall mitering on floor plan may be wrong if wall originates from an exploded Hotlink group
82935 DOCUMENT: Autotext does not update when drawing is copied to a different layout
84831 DOCUMENT: Door/Window outlines in polygon walls might not show in layout view
85345 DOCUMENT: Drawing is pen set is empty (all pens are inactive), if the drawing contains too many elements
85462 DOCUMENT: If an ArchiCAD 11 or earlier file contains elements that originate from an exploded Hotlink, dimensions attached to such elements in sections or elevations will be missing when file is migrated to ArchiCAD 12
80270 DOCUMENT: Importing a master layout from another file: drawing items on imported master do not show up in master layout view, although they are visible on layouts
80945 DOCUMENT: Impossible to create a new layout subset in Navigator when the root layout book is selected
84507 DOCUMENT: Level dimensions are not associative to project zero - they do not update if story height is modified
84987 DOCUMENT: Modifying a label attached to a building element does not stick - previous label appears after file save/open
80711 DOCUMENT: Some autotext entries are duplicated after editing text
85101 DOCUMENT: The Floor plan cut plane does not cut tilted beams at the proper height
85098 DOCUMENT: Under special circumstances, labels are missing from drawings that are present in the drawing's source view
85470 DOCUMENT: When opening an ArchiCAD 11 project in ArchiCAD 12, external drawings' pen set will be reset to the drawing is own pen set
84075 OPTIONS: Changing the default zone stamp of a zone category does not stick - After file save/open stamps are missing
84215 TEAMWORK: If one teammate edits panels of a Curtain Wall; labels associated with building elements; or markers, other teammates will not see the change
81996 WINDOW: Check markers palette - 'approve' checkbox incorrectly shows status.

In archive GRAPHISOFT ARCHICAD 12 HOTFIX 2325 UPGRADE and ONLY PATCH
« Poslednja izmena: 20.03.2010. 21:49 Dr.Mr.Kirica »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
50
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0
  

Diseño 2009 ver. 2
(Graphisoft Archicad 11, Autodesk Autocad 2009, Autodesk Revit Architecture 2009)
Spanish



Vi možete pregledati skrivene sadržaje !
http://rapidshare.com/files/144111307/D2K91SP.part01.rar
http://rapidshare.com/files/144114394/D2K91SP.part02.rar
http://rapidshare.com/files/144158042/D2K91SP.part03.rar
http://rapidshare.com/files/144160771/D2K91SP.part04.rar
http://rapidshare.com/files/144218257/D2K91SP.part05.rar
http://rapidshare.com/files/144218417/D2K91SP.part06.rar
http://rapidshare.com/files/144272253/D2K91SP.part07.rar
http://rapidshare.com/files/144273120/D2K91SP.part08.rar
http://rapidshare.com/files/144291934/D2K91SP.part09.rar
http://rapidshare.com/files/144276651/D2K91SP.part10.rar
http://rapidshare.com/files/144290098/D2K91SP.part11.rar
http://rapidshare.com/files/144776083/D2K91SP.part12.rar
http://rapidshare.com/files/144775444/D2K91SP.part13.rar
http://rapidshare.com/files/144827991/D2K91SP.part14.rar
http://rapidshare.com/files/144835092/D2K91SP.part15.rar
http://rapidshare.com/files/144859319/D2K91SP.part16.rar
http://rapidshare.com/files/144861435/D2K91SP.part17.rar
http://rapidshare.com/files/144891147/D2K91SP.part18.rar
http://rapidshare.com/files/144894369/D2K91SP.part19.rar
http://rapidshare.com/files/144990449/D2K91SP.part20.rar
http://rapidshare.com/files/144941910/D2K91SP.part21.rar
http://rapidshare.com/files/145006944/D2K91SP.part22.rar
http://rapidshare.com/files/145014223/D2K91SP.part23.rar
http://rapidshare.com/files/145037610/D2K91SP.part24.rar
http://rapidshare.com/files/145054277/D2K91SP.part25.rar
http://rapidshare.com/files/145095314/D2K91SP.part26.rar
http://rapidshare.com/files/145103635/D2K91SP.part27.rar
http://rapidshare.com/files/145563838/D2K91SP.part28.rar
http://rapidshare.com/files/145574170/D2K91SP.part29.rar
http://rapidshare.com/files/145600794/D2K91SP.part30.rar
http://rapidshare.com/files/145604793/D2K91SP.part31.rar
http://rapidshare.com/files/145627715/D2K91SP.part32.rar
http://rapidshare.com/files/145683643/D2K91SP.part32.rar
http://rapidshare.com/files/145632286/D2K91SP.part33.rar
http://rapidshare.com/files/145647825/D2K91SP.part34.rar
http://rapidshare.com/files/145655809/D2K91SP.part35.rar
http://rapidshare.com/files/145764449/D2K91SP.part36.rar
http://rapidshare.com/files/145668623/D2K91SP.part37.rar
http://rapidshare.com/files/145680871/D2K91SP.part38.rar
http://rapidshare.com/files/145683443/D2K91SP.sfv
Diseño 2009 ver. 2 | ISO | Language: Spanish | 3.7 Gb

Данас је први дан остатка нашег живота. Зато...
Sačuvana
49
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0
  

ArchiCAD v12 Hotfix 2285 Upgrade


ArchiCAD gives users the ability to create great architecture and increase productivity. From day one, ArchiCAD has been designed by architects for architects, and over the years it has gradually become more and more refined to allow its users to better:

Focus on design,
Manage change,
Evaluate design alternatives,
Collaborate,
Coordinate.

ArchiCAD offers a different approach to your workflow process, which gives you more control over your design, while maintaining accuracy and efficiency in documentation. While you raise walls, lay floors, add doors and windows, build stairs and construct roofs this Building Information Authoring Tool creates a central database of 3D model data. From this you can extract all the information needed to completely describe your design - complete plans, sections and elevations, architectural and construction details, Bills of Quantities window/door/finish schedules, renderings, animations and virtual reality scenes. That means while you*re designing, ArchiCAD is creating all the project documentation so there*s little repetitive and tedious drafting work. And unlike designing in 2D software, the Virtual BuildingTM approach also means that you can make changes at any time maintaining the integrity of your documents, without risking costly errors or costing you productivity.


Vi možete pregledati skrivene sadržaje !
http://www.megaupload.com/?d=4JH1E593
~66MB
« Poslednja izmena: 13.12.2008. 14:27 slyboogy »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
48
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0
  

Maxon Planivision (3D Model Collection)
Architecture and Landscape / CITY & STRET


Izgradite ulice u minutu sa ovom odlicnom kolekcijom sa punim teksturama, spremnom za koriscenje u 3D arhitektonskim modelima. Dizajnirani da udovolje nuznim potrebama arhitekata i projektanata, ovi modeli ce dramaticno skratiti vreme izrade projekata za vase scene ulica, pa se  mozete koncentrisati na "zvezdanu" atraktivnost. Pogodno za animaciju i "mirne" prikaze - perspektive. 
Fajlovi su u formatu c4d (cinema 4D...).
~55 MB

 :just:

Krace objasnjenjce kako se vrsi CAD povezivanje sa CINEMA 4D Architecture edition



The first step to creating a visualization using the Architecture Edition is to import your CAAD file to CINEMA 4D. This can be done quite easily by simply exporting your file from your CAD environment (Allplan, ArchiCAD or VectorWorks) directly into the C4D file format. All defined structures and hierarchies will be supported, and materials applied in the CAD application will be recognized and displayed in CINEMA 4D.

Subsequent changes to your model can also be easily transferred to CINEMA 4D. Whether you move a wall, add a window or delete an addition, the eXchange plugin will recognize the changes made when the file is imported anew and the existing visualization will be modified accordingly.

Objects modeled in CINEMA 4D can even be transferred to Allplan via XML. You can use the Material eXchanger plugin to automatically exchange a file's CAD materials with high-end CINEMA 4D materials upon import.

You have just completed the first steps to successfully creating a visualization - it's as easy as 1-2-3.
« Poslednja izmena: 11.12.2008. 11:14 slyboogy »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
47
Odgovor
Lendov_X
Administrator
**********
Van mreže
Pol: Muškarac
Teme: 3469 - Poruke: 8790
Windows XP
Firefox 3.0.4
  WWW 

Autodesk ImageModeler 2009


ImageModeler allows to measure and create photo-textured 3D objects from multiple photographs taken all around the objects.
ImageModeler is an "Object Creator" which takes as an assumption that you turn around the object when taking the pictures. Multiple images (more than 2) are needed as input (no panorama). 2D to 3D calibration is based on photogrammetry algorithms using a feature matching technique, which gives very accurate results. 3D measurement tools are also provided. Poygonal modeling is based on a set of conventional primitives and editing tools. Photo texturing is automatic by extracting the texture maps from the pixel information from the original pictures. Exports can be of different types, including Maya, 3DS, DWG, Lightwave, Softimage, OBJ, WRML, Google Earth...


http://anonym.to/?http://imagemodeler.realviz.com/products/IM/index.php?language=EN

Размер: 230 Mb
Download from Rapidshare

Download from Yandex
Pass: 9ds8f7s9d8f7s9d8f7

Sačuvana
46
Odgovor
Lendov_X
Administrator
**********
Van mreže
Pol: Muškarac
Teme: 3469 - Poruke: 8790
Windows XP
Firefox 3.0.4
  WWW 

Amethyst CADwizz MAX v3.03.28


Amethyst CADwizz MAX 3.03.28 | 13.2MB


Amethyst CADwizz MAX is designed to be a small and lean the fastest and neatest CAD viewer ever. View AutoCAD DWG and DXF files versions 2.5 to 2006. Add redline annotations. Convert files to any version of AutoCAD. Open and save zipped files. Create self-extracting encrypted archives. Wizzle your drawings to directly create hand-drawn effects.

Directly download and view files from the Internet. Convert DWG files to DXF, and DXF to DWG. Save drawings in BMP, GIF, PNG, JPEG, PCX, TGA, TIFF, PDF, EMF and WMF file formats.
View HPGL files. Zoom, pan and print drawings. View 3D views. Rotate drawings. Modify color and visibility of layers. Support for external references. Open multiple documents. Includes drag and drop functionality.

Download Links:

Download from Depositfiles
Vi možete pregledati skrivene sadržaje !
http://depositfiles.com/files/kcsdaab67
Download from Easy-Share
Vi možete pregledati skrivene sadržaje !
http://w15.easy-share.com/1702123770.html

Sačuvana
45
Odgovor
Lendov_X
Administrator
**********
Van mreže
Pol: Muškarac
Teme: 3469 - Poruke: 8790
Windows XP
Firefox 3.0.4
  WWW 

CADSoft Eagle Pro v5.3.0


CADSoft Eagle Pro v5.3.0 | 24.6MB
The EAGLE Layout Editor is an easy to use, yet powerful tool for designing printed circuit boards (PCBs). The name EAGLE is an acronym, which stands for Easily Applicable Graphical Layout Editor.

Program Features (Professional Edition):
*General
-online Forward- and Back-Annotation
-context sensitive help function
-no hardware copy protection!
-multiple windows for board, schematic and library
-powerful User Language
-integrated text editor
-available for Windows, Linux and Mac
*Layout Editor
-maximum drawing area 1.6 x 1.6m (64 x 64 inch)
-resolution 1/10,000mm (0.1 micron)
-up to 16 signal layers
-conventional and SMT parts
-comes with a full set of part libraries
-easily create your own parts with the fully integrated library editor
-undo/redo function for ANY editing command, to any depth
-script files for batch command execution
-copper pouring
-cut and paste function for copying entire sections of a drawing
-design rule check
*Schematic Editor
-up to 99 sheets in one schematic
-electrical rule check
-gate and pinswap
-create a board from a schematic with a single command
*Autorouter
-ripup&retry router
-up to 16 signal layers
-routing strategy driven by user definable cost factors
*CAM Processor
-Postscript
-pen plotters
-Gerber plotters
-Excellon and Sieb&Meyer drill files
-configurable through ASCII file for easy definition of your own output devices

Download Links:
Download from Depositfiles
Vi možete pregledati skrivene sadržaje !
http://depositfiles.com/files/q6eexvh01
Download from FileFactory
Vi možete pregledati skrivene sadržaje !
http://www.filefactory.com/file/0662be/n/eagpro_rar

Sačuvana
44
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0
  

Google SketchUp Pro 7.0.8657

<a href="http://www.youtube.com/v/6LFnxT98-WM&rel=1" target="_blank">http://www.youtube.com/v/6LFnxT98-WM&rel=1</a>



Google је половином новембра 2008.г. објавио SketchUp и SketchUp Pro 7, нову верзију њиховог 3D моделера у верзији за Mac и Windows системе (Linux се још чека). Нова верзија додаје функције за још интуитивније моделовање, а почетницима олакшава почетак уласка у ову компексну област.

Између осталог додати су и тзв. динамични делови (Dynamic Components). То су параметарски 3D модели који приликом промене димензија задржавају пропорцију. Поред понуђених компоненти врата, прозора, намештаја ... можете креирати и сопствене.

Директно из SketchUp 7 можете претраживати Google 3D Warehouse, интернет базу која садржи милионе 3D модела, и једноставним превлачењем их додати у свој рад.

SketchUp Pro 7 поседује нову алатку (посебну апликацију) названу LayOut 2 за креирање и дељење професионалних презентација направљених из SketchUp модела у векторском облику, додавање текста и графике, и наравно могућност штампе.

SketchUp можете преузети са Google-овог сајта, а за SketchUp Pro 7 је потребно издвојити (права ситница)  US$495...
...или... aq.gif

 :just:
Vi možete pregledati skrivene sadržaje !
http://rapidshare.com/files/165994899/SUp.Pro.v7.0.zip
комплет (setup+fix) ~60MB
само fix:
Vi možete pregledati skrivene sadržaje !
http://rapidshare.com/files/165994900/SUp.Pro.v7.0.Fix.rar
~10MB (ово радите само ако сте скинули setup са оригиналног сајта-уместо оригиналног убацујете овај фајл)

Ако вас којим случајем интересује тренинг за SktetcUP, ево га овде:
Google SketchUp Essential Training
 :just:
tod.gif
~500 MB
« Poslednja izmena: 20.03.2010. 21:47 Dr.Mr.Kirica »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
43
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.4
  

OBAVESTENJCE !!!

U nedelju 07.12.2008. (2 dana nakon ostavljenog roka) izvrsena je "inspekcija" podsekcije CAD i pobrisani su svi postovi sa totalno mrtvim linkovima. Gde je moglo, tu sam ubacio "zdrave" linkove, a ostali  tod.gif
Izbrisani su postovi sa zahvalnicama (za to postoji drugi nacin : "klik" na zahvalnicu sa donje desne strane posta).
Takodje, izbrisani su postovi sa dupliranim (istovetnim) linkovima i linkovima na kojima ima vise programa (spaseni su i izvuceni dosad nepostovani programi).

Molim vas za ubuduce, proveravajte linkove pre posta i jedan program = jedan post (bolja je preglednost i jasnija informacija)

Hvala

 :t: 
slyboogy

Данас је први дан остатка нашег живота. Зато...
Sačuvana
42
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.4
  

Woody 2.0.0.36 ISO
150 MB / Windows

CAD Program za dizajniranje i projektovanje namestaja
 :just:
ili
 :just:
koji se spajaju uz pomoc hjsplit-a
Kod:
http://www.freebytesoftware.com/download/hjsplit.zip


The Woody allows to create 3D model of furniture product. All parts are plane. They may have curved outline. Parts rest on the axial planes. Moving axial planes with special toggles you can change dimensions of any part and product as whole. Parts are automatically joint correctly each other. The layout of joint depends on selected part type.


The Woody helps designer to install fasteners and fittings. Designer has to select parts to be joined and Woody automatically proposes the list of suitable fasteners and fittings. Selected fitting is installed automatically by one button click. The model of fitting obtains proper orientation in 3D and follows selected parts.


The special wizard built-in Woody provides a possibility to generate models of differentkinds of drawers. You have to select kind of drawer only and adjust desirable parameters. Then all modelling is performed in 3D by one button click. When size of furniture product is changed, built-in drawer accomodates to changed size automatically.


In the same way as drawer you can create a system of sliding or bi-fold doors. You have to select type of rails quantity and material of doors. All further modelling is performed automatically.


It is easy to obtaine detailed list of parts and materials with all necessary dimensions specified. Prices are calculated automatically according to data in database, adjustable formulas and coefficients and currency exchange rate.


It is no problem to change color of doors, rails profile or even to change one sliding systemto another from other producer.


All drawings, necessary for furniture production are generated automatically by one button click. All dimensions, drill holes, part sizes, edge facing and so on are drawn automatically. Different kinds of dimensioning are provided and adjustable via "Parameters" menu.


The specifications of requred materials and parts of product are generated automatically. They may be exported to database storage to use for cutting layout creation.


The Sawyer software shares database with Woody. It can import data about part dimensions avoiding necessity of manual input of data. Sawyer produces optimized cutting patterns to saw parts from blanks of explicit materials.Sawyer supports stock of materials. It can remember remains and use them in the further sessions of cutting.


Woody 2.0 provides possibility to create and edit spacial scene containing several objects.


Resulting 3D model may be used to perform high resolution image rendering.

« Poslednja izmena: 02.12.2008. 22:32 slyboogy »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
41
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.4
  

Acme CADConverter v7.80



Koliko puta su vam poslali DWG fajl u formatu koji niste mogli da otvorite uz pomoc vase verzije AutoCAD-a? Koliko puta ste imali potrebu da vas DWG crtez u "bas takvom izgledu i boji" odstampate na nekom udaljenom ploteru, ali prilikom prenosa se desi promena fontova, stilova i sl, zato sto kompjuter uz ploter nema bas te vase fontove, stilove i sl?
Acme CADConverter je program za konvertovanje vektorskih fajlova. Moze konvertovati DXF,DWF i DWG fajlove sa BMP, WMF, GIF, JPEG, PCX, TIFF, PNG, TGA, DXF, DWG, SVG, SVGZ, CGM, EPS, PDF, HLGL(PLT,HGL) itd.., i takodje omogucava konverziju izmedju DXF i DWG fajlova razlicitih verzija (AutoCAD R2.5-R2008). Podrzava zamenu font fajlova. Moze eksportovati nivoe ("lejere" ili layers) izmedju DWG i PDF fajlova, a takodje moze eksportovati OLE entitete i raster entitete u PDF fajl.


 :just:
~3,2 MB

Данас је први дан остатка нашег живота. Зато...
Sačuvana
40
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.4
  

WaterCad v6.5120n



WaterCAD je kompletan geografski informacioni menadzment sistem (GIS ili GIMS) za modelovanje vodovodnih sitema (vodovd, kanalizacija), sa pracenjem cena troskova. Cuva novac i vreme. Analizira kvalitet vode, odredjuje i kalibrise velike distribucione mreze i mnogo toga jos. Hidraulicki proracuni, analize, menadzment distribucije, pracenje efakata...
*Moze raditi sam ili sa AutoCADom.

 :just:
pass:
Kod:
serbia
« Poslednja izmena: 02.12.2008. 19:02 slyboogy »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
39
Odgovor
slyboogy
Prijatelj foruma
*****
Van mreže
Pol: Muškarac
Teme: 73 - Poruke: 199
Windows XP
Firefox 3.0.4
  

Velika kolekcija blokova za AutoCAD

samo ime govori VELIKA KOLEKCIJA BLOKOVA ZA AUTOCAD - drvece, kola, ljudi, oprema i sl....
~50 mb
 :just:

pass
Kod:
serbia
« Poslednja izmena: 02.12.2008. 19:00 slyboogy »

Данас је први дан остатка нашег живота. Зато...
Sačuvana
  Štampaj  
Stranice: 1 2 3 [4] 5 6   Idi gore
 
Prebaci se na:  

Alexa
Load